Oil pressure sender, 0-100 psi, Datcon 240-33 ohm, w/20 psi alarm, blade type

Description

Brand new Stewart-Warner type oil pressure sender.
New blade type terminals so there is no chance to break for the terminals
Input: 0-100 psi.
Output:
240-33 ohms resistance. Case grounded. Stewart-Warner type.
S
– signal output blade.
WR
– Low 20 psi alarm switch.
Ground – case;
w
hen
pressure is bigger than 20 psi, the WR switch will be open, when pressure
is smaller 20 psi, the WR switch will be closed, or connect to ground.
Accuracy: within 5% full scale.
Thread: 1/8”-27 NPT. See our fitting set for other thread size below.
White zinc environment friendly plated, RoHS compliant.
Wiring connectors: 8-32 stud, with blades and socket.
Symbols: S for signal, should use wide blade, G for grounding.
Hardware bag include: sockets, insulating sleeves.
Dimensions: body diameter 1.76″, body length 1.5″, total length 3″.
This is a high quality, high reliable sender, can be used in gas. This sender is made by our specifications, using strong spring, high grade seal ring, etc..
For different thread size, 1/4″, 3/8″, 1/2″ NPT, see blow:
272326336606
We will give you $5.00 refund if you buy the above fitting set.
For matching gauges, see below link:
1921055017
16612838017
For other oil pressure sender, see link:
1921056017